Allied Telesis AT-S63 - Manual (Page 369)

AT-S63 Management Software Web Browser Interface User’s Guide
Section V: Virtual LANs 369
Displaying the GVRP State Machine
To display the GVRP state machine, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed by
default.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 146 on page 365.
4. In the View GVRP Parameters section, click View GVRP State
Machine for VLAN and enter the VLAN number in the box.
5. Click View.
The GVRP State Machine for VLAN page is shown in Figure 149.
Figure 149. GVRP State Machine for VLAN Page
The GVRP State Machine for VLAN page provides the information
shown in
Table 12 .
Table 12. GVRP State Machine Parameters
Parameter Meaning
Port Port number on the switch; this port belongs to
the GARP application. If the GARP application
has no ports, “No ports have been assigned” is
displayed.