Allied Telesis AT-S63 - Manual (Page 66)

Chapter 4: SNMPv1 and SNMPv2c
66 Section I: Basic Operations
Creating a New SNMPv1 and SNMPv2c Community
To create a new SNMPv1 and SNMPv2c community, perform the
following procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 175 on
page 436.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 14 on page 64.
4. In the SNMPv1 & SNMPv2c section, click Configure.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 15.
Figure 15. SNMPv1 & SNMPv2c Communities Tab
5. Click Add.