Allied Telesis AT-S63 - Manual (Page 155)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 155
The View Log Output page is shown in Figure 45.
Figure 45. View Event Log Output Page
This page displays the following information:
Output ID
An ID number for the log output.
Output Status
Whether or not the output is sent to the syslog server, either enabled or
disabled.
Message Format
The format of the messages sent to the syslog server.
Severity Selections
The severity of events sent to the syslog server. Scroll the list to view
all the selections.
Type
The only available type is Syslog and you cannot change this.
Syslog Server IP Address
The IP address of the syslog server.
Facility Level
The numerical code to be added to the entries sent to the syslog
server to group the entries according to the module or switch that
produced them.
Module Selections
Specifies the AT-S63 management software module(s) whose events
you want to send to the syslog server. Scroll the list to view all the
modules that have been selected for this log output.
4. When you are done, click Close.