Allied Telesis AT-S63 - Manual (Page 388)

Chapter 23: Protected Ports VLANs
388 Section V: Virtual LANs
Displaying a Protected Ports VLAN
To display the details of a protected port VLAN, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed by
default.
3. Select the VLAN tab.
The VLAN tab is shown in Figure 143 on page 356.
4. Click the circle next to the protected ports VLAN you want to view and
click View.
The View Protected VLAN page is shown in Figure 155.
Figure 155. View Protected VLAN Page
The VLAN Details section displays the following information.
VID
The VLAN ID.
Type
The VLAN type which is always Protected.