Allied Telesis AT-S63 - Manual (Page 45)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 45
Operator Password
Confirm Operator Password
Use these parameters to change the operator’s login password for the
switch. The password can be from 0 to 16 characters in length. The
same password is used for both local and remote management
sessions. To create a new password, enter the new password into both
fields. The default password for operator is “operator.” The password is
case sensitive.
Caution
Do not use spaces or special characters, such as asterisks (*) and
exclamation points (!), in a password if you are managing the switch
from a web browser. Many web browsers cannot handle special
characters in passwords.
Note
A change to a password is immediately activated on the switch. You
are prompted for the new password the next time you log in.
3. Click Apply to activate your change on the switch.
4. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)