Displaying the snmpv1 and snmpv2c communities, Figure 18: snmp tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 73
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations
73
Displaying the SNMPv1 and SNMPv2c Communities
To display the SNMPv1 and SNMPv2c communities, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab displayed by default, as shown in Figure 177 on
page 440.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 18.
Figure 18. SNMP Tab (Monitoring)
Advertising