Allied Telesis AT-S63 - Manual (Page 178)

Chapter 13: Access Control Lists
178 Section II: Advanced Operations
Displaying the Access Control Lists
To display the current ACLs, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select Network Security.
The Network Security page is displayed with the Port Security tab
selected by default, as shown in Figure 158 on page 397.
3. Select the ACL tab.
The ACL tab is shown in Figure 57.
Figure 57. ACL Tab (Monitoring)
The ACL tab displays a table of the currently configured ACLs that
contains the following columns of information:
ID
The ID number for the ACL.
Description
A description of the ACL.
Action
The ACL action of Permit or Deny. An action of Permit means the port
accepts the packets that meet the criteria of the classifiers assigned to
the ACL. An action of Deny means the port discards the packets,
unless the packets also match the criteria of a Permit ACL, in which