Allied Telesis AT-S63 - Manual (Page 397)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VI: Port Security 397
Displaying the Port Security Level
To display the MAC address security level of a port, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select Network Security.
The Network Security page is displayed with the Port Security tab
selected by default, as shown in Figure 158.
Figure 158. Port Security Tab (Monitoring)
3. Click the port whose port security level you want to view. A selected
port turns white. You can select more than one port at a time.
4. Click View.