Deleting an ace – Allied Telesis AT-S63 User Manual
Page 453
AT-S63 Management Software Web Browser Interface User’s Guide
Section VII: Management Security
453
Deleting an ACE
To delete an ACE from the Management ACL, perform the following
procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by default,
as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Mgmt. Security option.
The Mgmt. Security page is displayed with the Mgmt. ACL tab selected
by default, as shown in Figure 181 on page 449.
3. Select the ACE you want to delete from the Management ACL List
section in the tab and click Delete.
The ACE is deleted from the list.
4. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)