Displaying target address table entries, Figure 119: snmpv3 notify table tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 294
Advertising
Chapter 18: SNMPv3
294
Section III: SNMPv3
The SNMPv3 Notify Table tab is shown in Figure 119.
Figure 119. SNMPv3 Notify Table Tab (Monitoring)
Displaying Target
Address Table
Entries
To display entries in the SNMPv3 Target Address Table, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. Select the SNMP Tab.
The SNMP tab is shown in Figure 114 on page 289.
3. In the SNMPv3 section, lick the button next to View Target Address
Table and then click View at the bottom of the tab.
Advertising