Allied Telesis AT-S63 - Manual (Page 206)

Chapter 15: Quality of Service
206 Section II: Advanced Operations
Managing Policies
QoS policies consist of a collection of user-defined traffic classes. This
section contains the following procedures:
ˆ “Configuring a Policy,” next
ˆ “Modifying a Policy” on page 208
ˆ “Deleting a Policy” on page 210
ˆ “Displaying Policies” on page 210
Configuring a
Policy
To configure a policy, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Services option.
The Services page is displayed with the CoS tab selected by default,
as shown in Figure 59 on page 182.
3. Select the Policies tab.
The Policies tab is shown in Figure 75.
Figure 75. Policies Tab (Configuration)