Figure 134 – Allied Telesis AT-S63 User Manual
Page 323
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Spanning Tree Protocols
323
Figure 134. Configure MSTP Parameters Tab (Configuration)
Note
This procedure explains the Configure MSTP Parameters section of
the page. The CIST/MSTI Table is explained in “Adding, Removing,
or Modifying VLAN Associations to MSTIs” on page 330. The
graphic image of the switch is described in “Configuring MSTP Port
Parameters” on page 332.
Configure the following parameters as necessary.
Advertising