Allied Telesis AT-S63 - Manual (Page 144)

Chapter 11: Event Logs and Syslog Servers
144 Section II: Advanced Operations
6. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)
Displaying Events
Each time that you want to view the event log, you must choose how and
what you want displayed. The settings for viewing an event log are not
saved.
To specify the type of events in an event log you want to display, perform
the following procedure:
1. From the home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 42.
Note
You can also display events by selecting Configuration from the
home page and then the Event Log tab. The tab contains the same
Filter Settings and Actions section as described in this procedure:
2. Select the Event Log tab.