Allied Telesis AT-S63 - Manual (Page 18)

Preface
18
How This Guide is Organized
This guide is organized into the following sections
ˆ Section I: Basic Operations
The chapters in this section explain how to start a management
session and perform basic tasks including how to configure port
parameters, set up SNMPv1 and SNMPv2c, access enhanced
stacking, and create port trunks and a port mirror.
ˆ Section II: Advanced Operations
This section includes information about the file system, uploading and
downloading files, using the event log, and working with classifiers,
Quality of Service, IGMP, and Denial or Service prevention.
ˆ Section III: SNMPv3
The chapter in this section contains the procedures for configuring
SNMPv3.
ˆ Section IV: Spanning Tree Protocols
The chapters in this section contain the procedures for configuring the
Spanning Tree, Rapid Spanning Tree, and Multiple Spanning Tree
Protocols.
ˆ Section V: Virtual LANs
The chapters in this section cover port-based and tagged VLANs,
GVRP, multiple VLAN modes, and protected ports VLANs.
ˆ Section VI: Port Security
This section includes chapters on MAC address-based port security
and 802.1x port-based network access control.
ˆ Section VII: Management Security
This section contains chapters about encryption keys, PKI, Secure
Shell, TACACS+ and RADIUS, and the management access control
list.
Note
The web browser interface supports a subset of the management
functions of the switch. For a list of the management tasks that are
not available from this interface, refer to “Web Browser Interface
Restrictions” on page 35. Those management tasks that cannot be
performed from the web browser interface can be performed from
the menus and command line interfaces.