Allied Telesis AT-S63 User Manual
Page 303
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Spanning Tree Protocols
303
6. Click Apply.
7. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)
8. If you activated STP, go to “Configuring STP” on page 304. If you
activated RSTP go to Step “Configuring RSTP” on page 312. If you
activated MSTP, go to Chapter 20, ”Multiple Spanning Tree Protocol”
on page 319.
Advertising