Allied Telesis AT-S63 - Manual (Page 296)

Chapter 18: SNMPv3
296 Section III: SNMPv3
The SNMPv3 Target Parameters Table tab is shown in Figure 121.
Figure 121. SNMPv3 Target Parameters Table Tab (Monitoring)
Displaying
SNMPv3
Community
Table Entries
To display entries in the SNMPv3 Community Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 114 on page 289.
3. In the SNMPv3 section, click the button next to View Community
Table and then click View at the bottom of the tab.