Allied Telesis AT-S63 - Manual (Page 120)

Chapter 8: Port Mirroring
120 Section I: Basic Features
Displaying the Port Mirror
To display the port mirror, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 1 option.
The Layer 1 page is displayed with the Port Settings tab selected by
default, as shown in Figure 22 on page 85.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 36.
Figure 36. Port Mirroring Tab (Monitoring)
The Port Mirroring tab displays a table that contains the following
columns of information:
Mirror to Port
The destination port to which the traffic is copied and where the
network analyzer is located.
Ingress Port(s)
The source ports whose ingress traffic is mirrored to the destination
port.