Allied Telesis AT-S63 - Manual (Page 226)

Chapter 17: IGMP Snooping
226 Section II: Advanced Operations
Displaying a List of Multicast Routers
To view multicast routers, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. Select the IGMP tab.
The IGMP tab is shown in Figure 85 on page 223.
3. To view the multicast routers, click View Multicast Router List and
then click View.
The View Multicast Routers List is shown in Figure 87.
Figure 87. View Multicast Routers List Page
The View Multicast Routers List page displays a table that contains the
following columns of information:
Port
The port on the switch where the multicast router is connected.
VLAN ID
The VID of the VLAN in which the port is an untagged member.
Router IP
The IP address of the port on the router.
If the routers are static routers (specified with the Manual Select option
on the Configuration IGMP page), then the View Multicast Routers List
page opens, as shown in Figure 88 on page 227.