Allied Telesis AT-S63 - Manual (Page 207)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 207
The Policies tab displays the existing policies in a table that contains
the following columns of information:
ID
The ID of the policy.
Description
A description of the policy.
Active
Whether or not this policy is active on the switch.
Traffic Class List
The traffic classes assigned to the policy.
Ingress Port List
The ingress ports to which the policy is assigned.
4. Click Create.
The Create Policy page opens, as shown in Figure 76.
Figure 76. Create Policy Page
5. Configure the following parameters as necessary:
ID
Specifies the ID number for this policy. The range is 0 to 255.
Description
Specifies the policy description. A description can be up to 15
alphanumeric characters, including spaces.
Remark DSCP
Specifies the conditions under which the ingress DSCP value is
overwritten. Select one of the following options from the list: