Allied Telesis AT-S63 - Manual (Page 367)

AT-S63 Management Software Web Browser Interface User’s Guide
Section V: Virtual LANs 367
Displaying the GVRP Port Configuration
To display the GVRP port configuration, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed by
default.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 146 on page 365.
4. In the View GVRP Parameters section, click View Port
Configuration.
5. Click View.
The GVRP Port Configuration page is shown in Figure 147.
Figure 147. GVRP Port Configuration Page
The GVRP Port Configuration page provides the following information:
Port Number
The port number.
Mode
The port mode, either Normal or None.