Figure 39: system utilities tab (configuration) – Allied Telesis AT-S63 User Manual
Page 136
Chapter 10: File Downloads and Uploads
136
Section II: Advanced Operations
Caution
Downloading a configuration file as the switch’s new active boot
configuration file will cause a switch reset. Some network traffic may
be lost.
To download a file, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Utilities option.
The Utilities page is displayed with the System Utilities tab selected by
default, as shown in Figure 39.
Figure 39. System Utilities Tab (Configuration)
Note
You use the top portion of the System Utilities tab to return the
switch to its factory default settings. For instructions, refer to
“Returning the AT-S63 Management Software to the Factory Default
Values” on page 52.