Allied Telesis AT-S63 - Manual (Page 394)

Chapter 24: MAC Address-based Port Security
394 Section VI: Port Security
Configuring Port Security
To configure security for the ports, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Network Security option.
The Network Security page opens with the Port Security tab selected
by default, as shown in Figure 156.
Figure 156. Port Security Tab (Configuration)
3. In the graphical image of the switch, click the ports you want to
configure and click Modify. The Security for Ports page is shown in
Figure 159.
Figure 157. Security for Ports Page (Configuration)