Allied Telesis AT-S63 - Manual (Page 432)

Chapter 27: Secure Shell (SSH)
432 Section VII: Management Security
Displaying the SSH Settings
To view the Secure Shell settings, perform the following procedure:
1. From the Home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 42.
2. From the Configuration menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 177 on
page 440.
3. Select the Secure Shell tab.
The Secure Shell tab is shown in Figure 174.
Figure 174. Secure Shell Tab (Monitoring)
The Secure Shell tab provides the following information:
SSH Versions Supported
The versions of SSH that the AT-S63 management software supports.