Allied Telesis AT-S63 - Manual (Page 399)

Section VI: Port Security 399
Chapter 25
802.1x Port-based Network Access
Control
This chapter contains instructions on how to configure the 802.1x Port-
based Network Access Control feature on the switch. The chapter contains
the following sections:
ˆ “Setting Port Roles” on page 400
ˆ “Enabling or Disabling 802.1x Port-based Network Access Control” on
page 402
ˆ “Configuring Authenticator Port Parameters” on page 403
ˆ “Configuring Supplicant Port Parameters” on page 409
ˆ “Displaying the Port-based Network Access Control Parameters” on
page 411
ˆ “RADIUS Accounting” on page 415
Note
For background information on this feature, refer to Chapter 31,
“802.1x Port-based Network Access Control,” in the AT-S63
Management Software Menus Interface User’s Guide.