Allied Telesis AT-S63 - Manual (Page 356)

Chapter 21: Port-based and Tagged VLANs
356 Secton V: Virtual LANs
Displaying VLANs
To display the current VLANs on a switch, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 2 option.
3. The Layer 2 page is displayed with the MAC Address tab displayed by
default, as shown in Figure 27 on page 98.
4. Select the VLAN tab.
The VLAN tab is shown in Figure 143.
Figure 143. VLAN Tab (Monitoring)
The upper part of the tab displays the following information:
Mode
The VLAN mode. The possible settings are: