Allied Telesis AT-S63 User Manual
Page 437
AT-S63 Management Software Web Browser Interface User’s Guide
Section VII: Management Security
437
Note
The Enable Server-based Authentication check box applies only
when you are using the TACACS+ or RADIUS client software to
support new manager accounts. If you will be using RADIUS for
802.1x port-based access control only and not for new manager
accounts, you should leave the check box empty. The switch will still
be able to access the RADIUS configuration information for 802.1x
port-based access control.
5. Click Apply.
6. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)
To configure TACACS+, go to “Configuring TACACS+” on page 438.
To configure RADIUS, go to “Configuring RADIUS” on page 442.