Allied Telesis AT-S63 - Manual (Page 201)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 201
The Modify Traffic Class page is shown in Figure 72.
Figure 72. Modify Traffic Class Page
5. Configure the following parameters as necessary:
ID
Specifies the ID number for this traffic class. The range is 0 to 1023.
Exceed Action
Specifies the action to be taken if the traffic of the traffic class exceeds
the maximum bandwidth specified by the Max Bandwidth parameter.
The possible options are drop and remark.
DSCP
Specifies a replacement value to write into the DSCP (TOS) field of the
packets. The range is 0 to 63.
Burst Size
Specifies the size of a token bucket for the traffic class. The range is 4
to 512 Kbps. You must also specify the Max Bandwidth.
Remark Priority
Replaces the user priority value in the packets with the new value
specified in the Priority parameter.
Description
Specifies the traffic class description. A description can be up to 15
alphanumeric characters, including spaces.
Exceed Remark Value
Specifies the DSCP replacement value for traffic that exceeds the
maximum bandwidth. This value takes precedence over the DSCP
value. The default is 0.