Allied Telesis AT-S63 User Manual
Page 355
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Secton V: Virtual LANs
355
5. If you select one of the multiple VLAN modes, specify an uplink port in
the Uplink Port field. This port functions as the uplink port for the
VLANs. The default is port 1.
6. Click Apply.
The new mode is automatically activated on the switch.
7. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)
Advertising