Allied Telesis AT-S63 - Manual (Page 409)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VI: Port Security 409
Configuring Supplicant Port Parameters
To configure supplicant port parameters, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by default,
as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Network Security option.
The Network Security page opens with the Port Security tab selected
by default, as shown in Figure 156 on page 394.
3. Select the 802.1x Port Access tab.
The 802.1x Port Access tab is shown in Figure 160 on page 400.
4. Click the supplicant port that you want to configure. You can select
more that one supplicant port at a time. The selected port turns white.
Note
A port must already be designated as a supplicant before you can
configure its settings. For instructions on how to set the role of a
port, refer to “Setting Port Roles” on page 400.
5. Click Settings.
The Supplicant Parameters page is shown in Figure 162.
Figure 163. Supplicant Parameters Page