Allied Telesis AT-S63 User Manual
Page 258
Advertising
Chapter 18: SNMPv3
258
Section III: SNMPv3
The SNMPv3 SecurityToGroup Table tab is shown in Figure 99.
Figure 99. SNMPv3 SecurityToGroup Table Tab (Configuration)
4. To create an SNMPv3 SecurityToGroup Table entry, click Add.
The Add New SNMPv3 SecurityToGroup page is shown in Figure 100.
Figure 100. Add New SNMPv3 SecurityToGroup Page
5. In the Security Model field, select the SNMP protocol that was
configured for this User Name.
Choose from the following:
v1
Select this value to associate the Group Name with the SNMPv1
protocol.
Advertising