Allied Telesis AT-S63 - Manual (Page 99)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 99
View All
Displays all dynamic addresses learned on the ports of the switch and
all static addresses that have been assigned to the ports.
View Static
Displays just the static addresses assigned to the ports on the switch.
View Dynamic
Displays only the dynamic addresses learned on the ports on the
switch.
View MAC Addresses on Port
Displays the dynamic and static MAC addresses of a particular port.
You can specify more than one port at a time.
View MAC Addresses for VLAN
Displays the static and dynamic addresses learned on the tagged and
untagged ports of a specific VLAN. You specify the VLAN by entering
the VLAN ID number. You can specify only one VLAN at a time.
View MAC Address
Displays the port number on which a MAC address was assigned or
learned.
In some situations, you might want to know on which port a particular
MAC address was learned. You could display the MAC address table
and scroll through the list looking for the MAC address. But if the
switch is part of a large network, finding the address could prove
difficult.
The View MAC Address option allows you to specify the MAC address
and let the AT-S63 management software automatically locate the port
on the switch where the device is connected.
3. After you select an option, click View.