Displaying the gip connected ports ring – Allied Telesis AT-S63 User Manual
Page 375
AT-S63 Management Software Web Browser Interface User’s Guide
Section V: Virtual LANs
375
Displaying the GIP Connected Ports Ring
To display the GIP connected ports ring, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed by
default.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 146 on page 365.
4. In the View GVRP Parameters section, click View GIP Connected
Ports Ring.
5. Click View.
The GIP Connected Ports Ring page is shown in Figure 151.
Figure 151. GIP Connected Ports Ring Page
The GIP Connected Ports Ring page displays a table that contains the
following columns of information:
GIP Context ID
A number assigned to the instance for the GIP context.
STP ID
Present if the GARP application is GVRP; identifies the spanning tree
instance associated with the GIP context.
Ring
The ring of connected ports. Only ports presently in the spanning tree
Forwarding state are eligible for membership in the GIP connected