Allied Telesis AT-S63 - Manual (Page 277)

AT-S63 Management Software Web Browser Interface User’s Guide
Section III: SNMPv3 277
v1
Select this value to associate the Security Name, or User Name, with
the SNMPv1 protocol.
v2c
Select this value to associate the Security Name, or User Name, with
the SNMPv2c protocol.
v3
Select this value to associate the Security Name, or User Name, with
the SNMPv3 protocol.
8. In the Security Name field, enter a User Name that you previously
configured with the SNMPv3 User Table.
See “Creating a User Table Entry” on page 236.
9. In the Security Level field, select one of the following Security Levels:
Note
The value you configure for the Security Level must match the value
configured for the User Name in the User Table Menu. See
“Creating a User Table Entry” on page 236.
No Authentication/Privacy
This option represents neither an authentication nor privacy protocol.
Select this security level if you do not want to authenticate SNMP
entities and you do not want to encrypt messages using a privacy
protocol. This security level provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c as the Security Model,
you must select No Authentication/Privacy as the Security Level.
Authentication
This option represents authentication, but no privacy protocol. Select
this security level if you want to authenticate SNMP users, but you do
not want to encrypt messages using a privacy protocol.You can select
this value if you configured the Security Model parameter with the
SNMPv3 protocol.
Privacy
This option represents authentication and the privacy protocol. Select
this security level to allow authentication and encryption. This level
provides the greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3 protocol.