Allied Telesis AT-S63 - Manual (Page 190)

Chapter 14: Class of Service
190 Section II: Advanced Operations
Displaying the QoS Schedule
To display the QoS schedule, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select the Services option.
The Services page is displayed with the CoS tab selected by default,
as shown in Figure 62 on page 188.
3. Select the Queuing and Scheduling tab.
The Queuing and Scheduling tab is shown in Figure 64.
Figure 64. QoS Scheduling Tab (Monitoring)
The upper section displays the CoS priority to egress queue
assignments. The lower section displays the egress weight settings.