Metrohm 915 KF Ti-Touch - Manual (Page 103)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 89
for 814 USB Sample Processor XL:
Input range
100.0 - 300.0 mm
Default value 166.0 mm
for 815 Robotic USB Sample Processor XL:
Input range
100.0 - 300.0 mm
Default value 196.0 mm
11.5.3 Properties – Swing Head
List of devices: Sample Processor ▶ Edit ▶ Swing Head ▶ Properties
The dialog Edit device / Properties shows a list of all external positions
with the assigned swing angle and the specific work position for each.
[Ext. pos. 1-4]
Edit the settings that apply for all external positions (see "Properties –
External positions 1-4", page 89).
[Robotic arm]
Edit the robotic arm settings (see "Properties – Robotic arm", page 91).
[Adjustment data]
Display the overview of the EEPROM data of the Swing Head. This dialog
cannot be edited.
[Edit]
Edit specific settings of the selected external position (see "Properties –
External position", page 92).
Properties – External positions 1-4
Swing Head: Properties
▶ Ext. pos. 1-4