Metrohm 915 KF Ti-Touch - Manual (Page 250)

27.2 Measuring
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
236 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
The ongoing measurement is canceled with [Stop]. The label
switches once again to [Start].
27.2.1 Parameter description
Dialog "Manual control / Measure"
Sensor
Selection of the sensor from the sensor list. Sensors are defined under
System
▶ Sensors.
Selection Selection of configured sensors
Measuring input
Selection of the measuring input the sensor is connected to. The selection
depends on whether the control device has one or two measuring interfa-
ces.
Selection 1 | 2
Default value 1
Measuring mode
Selection of the measuring mode. Only those measuring modes are dis-
played which are advisable for the selected sensor.
Selection Ipol | Upol | T
Ipol
voltametric measurement with selectable polarization current
Upol
amperometric measurement with selectable polarization voltage
T
Temperature measurement