11 device manager – Metrohm 915 KF Ti-Touch User Manual
Page 88
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
74
￭￭￭￭￭￭￭￭
915 KF Ti-Touch
11 Device manager
Main dialog: System
▶ Device manager
This chapter describes how you can configure the Ti-Touch, the USB Sam-
ple Processor and the connected peripheral devices. A detailed description
of the hardware installation of the USB Sample Processor can be found in
the corresponding installation manual.
The instrument list gives the name and type of every instrument. The Ti-
Touch titrator is a component of the 915 KF Ti-Touch and therefore per-
manently entered as control instrument in the device manager. A connec-
ted USB Sample Processor with the peripheral devices (dosing devices, stir-
rers, etc.) connected to the MSB connector is entered in the list automati-
cally. A USB/RS-232 adapter will also be automatically recognized and
entered in the instrument list with default settings. A printer is entered in
the instrument list in the default settings. You must enter a PC keyboard, a
barcode reader or a balance in the instrument list yourself.
[New]
Add a new device to the list (see Chapter 11.1, page 75).
[Delete]
Delete the selected device from the list.
NOTE
Devices which are recognized automatically cannot be deleted from the
list while they are still connected.
[Edit]