2 reagent monitoring, Reagent monitoring – Metrohm 915 KF Ti-Touch User Manual
Page 81
Advertising
■■■■■■■■■■■■■■■■■■■■■■
9 Reagents
915 KF Ti-Touch
■■■■■■■■
67
Reagent
The designation of the reagent is used for unambiguous identification.
Entry
24 characters maximum
Comment
Entry
24 characters maximum
[Reagent monitoring]
Set the parameters for the reagent monitoring, see following chapter.
9.2
Reagent monitoring
The conditions for the monitoring of the reagent are defined in the dialog
Edit reagent / Reagent monitoring.
If one of the following values is reached, then the reagent must be
replaced. The values are checked in the following cases:
■
at the start of the determination.
Advertising