Metrohm 915 KF Ti-Touch - Manual (Page 99)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 85
Switch on
on | off (Default value: on)
If this parameter is activated, then you will be requested to prepare the
dosing device when the Ti-Touch is switched on.
Attach an exchange or dosing unit
on | off (Default value: on)
If this parameter is activated, then you will be requested to prepare the
dosing device when the exchange/dosing unit is attached.
Time interval
on | off (Default value: off)
Activate this parameter if you wish to receive a regular request to prepare
the dosing unit.
Input range 0.1 - 999.9 h
Default value 12.0 h
11.4.3 Properties – Peripheral devices
List of devices: Control device ▶ Edit ▶ Peripheral device ▶ Proper-
ties
The following data is displayed for the connected dosing devices and stir-
rers:
￭ Type
The display includes the device number, e.g. "800" (Dosino)
￭ Serial number
11.5 USB Sample Processor
NOTE
The following settings apply to all USB Sample Processors.