Metrohm 915 KF Ti-Touch - Manual (Page 143)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
13 GLP manager
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 129
[Validation interval]
Define the time interval for the system validation (see "Dialog "System val-
idation / Validation interval"", page 129).
[Test statistics]
Document the statistical data of the system validation (see "Dialog "Sys-
tem validation / Test statistics"", page 130).
Dialog "System validation / Note (SOP)"
In this dialog, you can enter a brief text, e.g. a summary of the SOP
(standard operating procedure) according to which the system validation
was carried out.
Dialog "System validation / Validation interval"
Last validation
Date on which the last system validation was carried out.
Format: YYYY:MM:DD
Monitoring
on | off (Default value: off)
If this parameter is activated, then the time interval after which a system
validation has to be carried out again will be monitored.
Validation interval
If you define a time interval for the system validation, then the date in
Next validation will be tracked automatically.
Input range 1 - 999 days
Default value 999 days
Next validation
If you define a time interval for the next system validation, then the Vali-
dation interval will be tracked automatically.
Format: YYYY:MM:DD
Action
Selection of the action which is carried out when the time interval has
expired.