Metrohm 915 KF Ti-Touch - Manual (Page 160)

15.2 Custom result templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
146 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
Display result
on | off (Default value: on)
If you deactivate this parameter, the result is neither displayed in the result
dialog nor printed in the result report. This can be advisable for intermedi-
ate results.
Save result in result table
on | off (Default value: off)
The calculated result can be saved in the result table. This may be advisa-
ble if e.g. the results of all determinations carried out on a particular day
are to be displayed clearly. A maximum of nine results from a determina-
tion can be saved in the result table.
Precision
Setting, with which accuracy the result is used in additional calculations.
Selection Round | Truncate | Full precision
Default value Round
Round
The result is rounded to the defined number of decimal places (com-
mercial rounding, in accordance with the US Pharmacopeia USP). If the
digit at the first dropped decimal place is 1, 2, 3 or 4, then it will be
rounded off; if this digit is 5, 6, 7, 8 or 9, then it will be rounded up.
Negative digits will be rounded in accordance with their amount, i.e.
away from zero.
Truncate
The result is cut to the number of decimal places defined.
Full precision
The result is used with full accuracy (floating point number either in
"single precision" (32 bit) or in "double precision" (64 bit), according to
the standard IEEE 754).