Metrohm 915 KF Ti-Touch - Manual (Page 251)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 237
Temperature
Temperature entered manually. If a temperature sensor is connected then
the temperature will be measured continuously.
Input range –20.0 - 150.0 °C
Default value 25.0 °C
[Info sensor]
Display information on the sensor.
27.3 Dosing
Manual control ▶ Dosing
The following dosing functions are available:
￭ Preparing the exchange or dosing unit (see Chapter 27.3.3, page 244)
￭ Emptying the dosing unit (see Chapter 27.3.4, page 245)
￭ Filling the dosing cylinder of the exchange unit/dosing unit (see Chap-
ter 27.3.5, page 245)
￭ Dosing a specified volume (see Chapter 27.3.2, page 241)
￭ Dosing continuously (see Chapter 27.3.1, page 239)
Selecting the dosing device
If several dosing devices are connected to a control device, then the dia-
log for selecting a dosing device will be opened.
[Dosing device 1…4]
Selection of the dosing device. The MSB connector and the type of the
connected dosing device are displayed.
Next to the button various information is shown: