Metrohm 915 KF Ti-Touch - Manual (Page 359)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
31 Appendix
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 345
The selection of the result variables is displayed in the number editor.
NOTE
If the method before the command with the result variables applied
contains more than one calculation commands (possibly with result var-
iables bearing the same name), then the result variable of the preceding
calculation command will always be used.
Please note that the result must be within the input range of the para-
meter, as otherwise the determination run will be stopped when the
parameter is accessed.
31.7 Diagnosis
System ▶ Diagnosis
The electronic and mechanical functional groups of Metrohm instruments
can and should be checked by specialist personnel from Metrohm as part
of a regular maintenance schedule. Please ask your local Metrohm repre-
sentative regarding the precise terms and conditions involved in conclud-
ing a corresponding maintenance agreement.
The following functions are available:
￭ LCD test
Check the display for faulty pixels (see Chapter 31.7.1, page 346).
￭ Format storage medium
Format the external storage medium (see Chapter 31.7.2, page 347).
￭ Remove storage medium
Remove the external storage medium safely (see Chapter 31.7.3, page
347).