1 adding a new sensor, 2 editing the sensor data – Metrohm 915 KF Ti-Touch User Manual
Page 85
Advertising
■■■■■■■■■■■■■■■■■■■■■■
10 Sensors
915 KF Ti-Touch
■■■■■■■■
71
10.1
Adding a new sensor
Before you can use a sensor, you must add it to the sensor list. To do this,
use the button [New].
■
The properties dialog is opened after the sensor type has been
selected, see following chapter. The following sensor types can be
selected:
– Metal electrode (Pt electrode)
– Other sensor
– Temperature sensor
10.2
Editing the sensor data
Sensor list: Sensor
▶ New / Edit
All of the data for the selected sensor is displayed in the dialog Sensors /
Edit.
Sensor
The designation of the sensor is used for unambiguous identification.
Entry
24 characters maximum
Order number
Order number of the sensor.
Entry
24 characters maximum
Default value
empty
Serial number
Serial number of the sensor.
Advertising