Metrohm 915 KF Ti-Touch - Manual (Page 172)

16.4 Editing a method
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
158 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
[Insert command]
Insert a new method command. It is inserted before the selected com-
mand.
NOTE
Not all commands are available for subsequences. Commands which
cannot be inserted into subsequences are disabled.
[Delete command]
Delete the selected method command.
[Edit command]
Edit the selected method command.
16.4.1 Inserting a command
A method is comprised of individual commands. When you start a deter-
mination, the commands are executed one after the other.
The following constraints apply:
￭ Maximum of 99 commands
￭ Maximum of nine commands for titrations and measurements
Inserting a command
To insert a command in a method, proceed as follows:
1 Open the command overview
￭ In the main dialog, tap on [Edit parameters].
￭ Tap on the button [Insert command].