Metrohm 915 KF Ti-Touch - Manual (Page 84)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
70 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
10 Sensors
Main dialog: System ▶ Sensors
This chapter describes how you can create a list of the sensors used in the
system.
Two standard sensors are defined in the sensor list: Metal electrode and
Temperature sensor. These sensors cannot be deleted or renamed. A
maximum of 25 additional sensors can be added to these sensors.
For each sensor, the following data is displayed in the sensor list:
￭ Designation
￭ Type
– Metal: Metal electrode
– Temp.: Temperature sensor
The following sensor data is stored in the list of sensors:
￭ Name
Each sensor in the system is identified by its unambiguous name.
￭ Working life
￭ etc.
[New]
Add a new sensor to the list (see Chapter 10.1, page 71).
[Delete]
Delete the selected sensor from the list.
[Edit]
Edit the data of the selected sensor (see Chapter 10.2, page 71).