Metrohm 915 KF Ti-Touch - Manual (Page 206)

22.1 Editing the sample data of the running determination
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
192 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
22 Live modifications
22.1 Editing the sample data of the running determina-
tion
The sample data can be entered or modified in the main dialog while a
determination is running. The sample data entered at the end of the
determination is always used in calculations.
Proceed as follows to edit the sample data:
1 Display the main dialog
￭ Tap on the fixed key [ ].
The main dialog is displayed. The determination continues to run in
the background.
2 Edit the sample data
￭ Edit the sample data and apply with [OK].
3 Display the live dialog
￭ Tap on [Live display].
The live dialog is displayed once again.
NOTE
Make sure that the input dialogs are closed before the determination is
ended. Otherwise the determination will have to be recalculated.