Metrohm 915 KF Ti-Touch - Manual (Page 107)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 93
Input range (Offset) - (Offset + max. swing range) °
Default value 60.00 °
The offset is made up of a design-dependent angle
(approx. 8…9°) together with the robotic arm off-
set from the robotic arm properties. The maximum
swing range is also defined under the robotic arm
properties (see "Properties – Robotic arm", page
91).
Work position
Work position for the selected external position.
Input range 0 - 'maximum stroke path' mm
A lift position of 0 mm corresponds to the "home
position", i.e. the lift is located at the upper stop
position. The maximum stroke path is defined in the
properties of the tower (see "Maximum stroke
path", page 88).
11.6 Sample racks
List of devices: Sample Processor ▶ Edit ▶ Racks
In the dialog Edit device / Sample racks, you will find the list of config-
ured racks. The attached rack is displayed in green. New racks can be loa-
ded or created and existing ones can be edited or deleted in this dialog
window.
The following data is displayed in the list:
￭ Rack
Name of the sample rack. Metrohm standard racks are designated by
their order numbers.