Metrohm 915 KF Ti-Touch - Manual (Page 35)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 21
Figure 7 Connecting a temperature sensor
NOTE
The red plug must always be plugged into the red socket for the
purpose of shielding against disruptions.
4.7 Connecting the Ti-Touch to a network
The 915 KF Ti-Touch has a network connection (Ethernet). This can be
used to integrate your Ti-Touch in your network. You can, for example,
store data on a PC within the network or print reports on a network
printer. In Chapter 11, page 74, you will find information as to which
settings are necessary for the network connection.