4 output lines – Metrohm 915 KF Ti-Touch User Manual
Page 163
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
15 Templates
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
149
15.4
Output lines
Main dialog: System
▶ Templates ▶ Output lines
In the dialog Templates / Output lines, you can define the output sig-
nals at the remote interface as a template. You can select these templates
in the command CTRL. The list can contain a maximum of 20 templates.
Table 5
List of predefined output signals
Signal name
Output signal
Function
Continue
*********p****
sends a stepping pulse to the connected Sample
Processor.
Init
00000000000000
initializes the remote interface.
Meter Cal C
*********1001*
switches the 781 pH/Ion meter to concentration
calibration.
Meter Cal pH
*********0101*
switches the 780/781 pH/Ion meter to pH calibra-
tion and starts the calibration.
Meter enter
*********1111*
simulates the [Enter] key of the 780/781 pH/Ion
meter; mandatory for pH calibration in order to
start the measurement of the second buffer.
Meter Mode C
*********1000*
switches the 781 pH/Ion meter to concentration
measurement.
Meter Mode I
*********0100*
switches the 780/781 pH/Ion meter to voltametric
measurement with polarization current and starts
the measurement.
Meter Mode pH
*********0001*
switches the 780/781 pH/Ion meter to pH mea-
surement and starts the measurement.